Overview | Intrinsically Safe Sample Conditioning Systems
Our Sample Conditioning Packages are designed to ensure that our gas sensors always have a clean and dry sample gas stream. Process conditions that include solvents, corrosive chemicals, and temperature extremes present significant challenges. To deliver accurate and reliable gas measurement, sensors require a sample that is free of contaminants. Sample conditioning systems built to withstand harsh processing conditions and efficiently remove damaging contaminants from the sample stream are critical to delivering reliable continuous-duty low-maintenance gas monitoring.
AGI provides systems for use in processes with continuous or varying pressure, ranging from high vacuum to 2,000 PSI. Three standard sample extraction methods are used to get the sample gas to the sensor. A continuous positive pressure drive system is used for process pressures above 5 PSI. A pneumatically driven intrinsically safe aspirator is used for pressures closer to atmospheric, and a vacuum pump drive system is used for processes running at high vacuum or if compressed gas consumption is a concern.
An industry leader in process gas sample conditioning, we have designed and installed HUNDREDS of systems in industrial manufacturing plants. Starting with a focus on applications in the O&G industry back in 2010, our markets have expanded to include applications in a variety of industries ranging from paints/coatings, pharmaceuticals, and industrial gases to power generation, metals production and food & beverage.
GAS SAMPLING METHODS
AGI provides three standard sampling methods designed for continuous extractive measurement.
Continuous Positive Pressure-driven
Continuous positive pressure within the process vessel or system provides the force that pushes the sample gas from the process to the sensor. Suitable for operating pressures between 5 and 300 psig, these systems include a pressure regulator to control the pressure and flow of the sample gas through the system.
A pneumatically-driven aspirator is used to extract the sample gas from the process. Using compressed air or nitrogen as the drive gas, the aspirator produces vacuum by means of the Venturi effect. This vacuum is used to draw the sample gas from a long distance without long lag times in sensor response. Used for solvent-based or powder processing, these systems are ideally suited processes operating at pressures ranging from -25 inH2O to 5 psig.
When compressed gas is not available or when the process is running at high vacuum, a diaphragm vacuum pump is used to draw the sample gas stream to the sensor. Sized for the application, the vacuum pump is also used when compressed gas consumption is of concern.
1. Fixed Gas Detectors
2. Gas Analyzers Support System
3. Contionous Emissioning Monitering SSystems
Please fill the below form with your query